Thermostat wells
Description
Thermostat well is intended for installation in designated device (e.g. electrical boiler, water heater). Installation is done by screwing the well neck to device coat using suitable sealing. To install the thermostat, insert it into the well of suitable size and secure it by M4 bolt (thermostat series TH 160).
Installing thermostat series TH 140, place its head before securing the lock-nut. Do not rotate the thermostat head when lock-nut is secured as this can damage the thermostat.
Maximum working pressure is PN 6 according to ČSN 130010. All manufactured thermostat wells are subjected to pressure leak test by air under water.
Technical data
| Thermostat type |
L [mm] |
L1 [mm] |
| TH 140 | 337 | 360 |
| TH 140 ZP 16 | 107 | 130 |
| TH 141 | 287 | 310 |
| TH 143 | 337 | 360 |
| TH 144 | 287 | 310 |
| TH 160 | 324 | 336 |
| TH 160.1 | 324 | 336 |
| TH 160.2 | 324 | 336 |
| TH 162 | 110 | 122 |
| TH 163 | 110 | 122 |
| TH 164 | 170 | 182 |
| TH 165 | 170 | 182 |
| TH 166 | 210 | 222 |
| TH 167 | 260 | 272 |
| TH 169 | 324 | 336 |
Material
TH 160 + Series:
Well neck - steel
Stem -copper
Coating - chrome Ni10 Cr0,2 (hard chrome glossy)
TH 140 + Series:
Well neck - steel
Stem - steel
Coating - chrome Ni10 Cr0,2 (hard chrome glossy)
Hard chrome: The advantage of using hard chrome coating is its high corrosion resistance, hardness and abrasion resistance.
Dimensional drawings
 |
 |
|
TH 160 well
|
TH 140 well |
Files to download
Catalogue sheetPhotos of the product
