Thermal cutout TH 476

Thermal cutout TH 476 is intended for disconnecting of electrical circuit when the switch-off temperature is reached. Reset can be done by pressing the reset pin. Thermal cutout protects the device against overheating and overloading.
24 V      6 A

Description

Thermal cutout TH 476 is made as one unit. Sensor and the electrical switch system are assembled, adjusted and enclosed in the brass body. To install it in specified hole, use thread M 22x1.,5 and hexagon OK 27 on the cutout body.

Connecting terminals are flat pins 6.3 mm that are electrically insulated from the cutout body. There is a reset pin located beside connecting terminals. Cutout head with flat pins is connected permanently with cutout body.

Installation

Fix TH 476 in specified hole using spanner No. 27. Screwing and unscrewing must not be done using flat pins on thermostat head.

Advantages

  • any working position
  • possibility of manual reset

Technical data

Thermal cutout TH476 is made in switch-off design (R). Cutout can be reset manually when temperature falls 15 °C or more below rated temperature. To protect device against frost, cutout is switched on automatically when temperature falls below 10 °C.
Range of rated temperature from 35 °C to 115 °C
Setting accuracy of rated temperature ±2 °C (A), ±4 °C (B)
Rated voltage, rated current 24 V, 6 A DC
Lifetime 300 cycles
Resistance against vibrations 5 g
Weight approx. 70 g

Ordering

Please specify following items in order:

  • type
  • rated temperature [°C]
  • setting accuracy of rated temperature
  • quantity

Dimensional drawings

Photos of the product

Do you need help? Contact us!